Low-key and restrained but extraordinary strength carbon one carbon fiber ring iron headphones


In fact, the circle iron headphones still belong to a relatively new concept for me, and the contact is relatively small, because I prefer to listen to rock and DJ so most of them were touched by dynamic headphones before, also touched UE900 moving iron headphones, although the high resolution There is nothing to chase away, but it feels that whether it is dynamic or dynamic, it should be self-reliant while trying to adjust and supplement its own deficiencies. Therefore, it is the best choice for me to think about putting aside customization. Carbon one carbon fiber ring iron The headset is a ring-and-iron headset with a relatively high degree of attention recently, and uses a U2 circle iron hybrid technology with a special metal diaphragm (specifically unknown). The external body is made of carbon fiber material, which ensures light weight while greatly increasing the strength of the fuselage. The material properties of the external body have a certain protective effect against radiation and corrosion resistance. It should be said that Carbon one's material is full, of course. Headphones, especially the high-end positioning ring iron headphones, are the main timbre. URBANFUN, as a Baodao brand, entered the mainland market this year. For Taiwan-funded enterprises, I personally appreciate their control over quality control. Nonsense, let's take a look at the following:



Carbon one's product packaging only uses the inside and outside the double packaging, the outer layer of black hard cardboard outsourcing, the overall design color tone font features a brief introduction, and the company's unique brand style has a relationship, but it is recommended that the Carbon logo can be used products The logo is tinted with green stamping, which makes it even more compelling. At the bottom, there is a WeChat WeChat QR code and product related parameters:

Headphone type: ear type

Impedance: 25Ω

Sensitivity: 110dB/v

Plug: CTIA American Standard / 3.5mm metal-plated interface

Wire rod: 1.2m

Maximum use power: 5mW

Frequency Response Range: 5Hz-40KHz

Look at the parameters from the headphone or better push.


The inside is a book-type black card counterfeit, and the thickness of the outer packaging of the apple product is very good. It has a good protection effect on the product. The seal is recommended to use a seal with a brand logo to increase the brand recognition, but it can also be very good Used unpacking.




Due to the large number of accessories inside, the card slot is also divided more.



I am also amazed by the number of carbon one accessories. Even the K3003 does not have so many accessories. Here's a brief introduction to all accessories.



One of the famous names of the monkeys. This is my 23rd product and it is an honor for me.





After opening the packet is the product VIP, as well as the product specification, this style is more interesting, a bit like a child pack folded in the northeast package, you can see that the ape is still a little unique bright spot.



The aircraft adapters that can be seen in the basic flagship products of various brands have a gold-plated surface, which can effectively prevent oxidation and ensure better transmission of the plug.





3.5mm to 6.5mm adapter, the same gold-plated treatment, in fact, whether it is gold-plated or nickel-plated in my opinion is an image of the product and the necessary assembly, and some people may feel that even if the headset is broken, this will not oxidize , It is your environment is relatively dry, it is your use of the plug may be more frequent, some are not used every day, the family environment is more than trying to be very much needed.





Very loving metal monkey clamp, you can use as needed to control the tpe (rubber line) bifurcation position. As above



A pair of ear hooks and a cochlea, individuals prefer ear hanging. This method of burying and fixing the wire near the earphone unit in the ear can be a good way to reduce the stethoscope effect. It is recommended that you try it when you wear it.

The following ear hook and cochlea collocation methods:





The individual feels that the size of the cochlea is somewhat inappropriate, and may vary from person to person, but the ear hook is indeed very good, it is soft, and it is not afraid of strong exercise after wearing it.


The product presented 3 sets of different sizes of silicone earmuffs and 3 sets of memory foam earmuffs of different sizes. Individuals prefer memory sponges, which are more comfortable and fit. Stronger silicone earmuffs have better noise reduction effect and thus can be heard. Essential music effects.



Headphone storage box, the classic black and green color of monkeys is quite eye-catching, compared to the storage headphones, I prefer to store these accessories, after all, these gadgets put it out of the box where I really die. . . .



Carbon one wire and wire.



TPE can be used in the upper part of the DIY connector to facilitate enthusiasts to change the wire, and the connector can be unknown 360-degree rotation, the user can easily adjust the headset ear angle, (usually used to join after the line after entering the way), full of humanity. The connectors are gold-plated and like this one. However, the material of rubber is a little too fine, which makes me worry about the service life of the wire. Of course, the replaceable setting of DIY can eliminate my worry, but for the average user, the wiring is also a little troublesome, so it is recommended that manufacturers have so many accessories. One more perfect with a DIY rubber line (preferably with a green product logo color)


At the bottom of the wire control, the wire is used to make the wire feel nylon. The L-type plug is more reasonable. Whether it is a mobile phone or other portable device, the L-type plug in the pocket is not easily broken to protect the port wire from damage.



The wire-controlled surface adopts a brushed and grained finish, which is aesthetically beautiful. Unfortunately, there is no label above the key. The microphone on the back uses a new generation of capacitive MICs to optimize signal interference. Of course, some people in the headset circle think that HIFI headphones should remove everything that may affect the sound quality. This, I feel, must be considered according to different groups of people. This is a matter of opinion.





Carbon one's body is made of mosaic-style carbon fiber material, the surface is smooth with metallic luster, the hardness is theoretically several times that of steel, and the weight is less than 1/5 of steel, internal collocation and independent research and development UE circle iron mix Technology, and dynamic iron + special metal diaphragm adjustment. Mixing unit design can effectively exert their respective advantages. You don't have defects in each other. It not only guarantees a shocking low-frequency effect, but also has good extensibility to human voice and high frequency. DIY wire excuse is still gilded, like one.


Personally recommend the ape monkey's image logo design can be more concise, and the best outline of the green portrayed, more eye-catching, otherwise the logo can only be seen through the border between light and dark boundaries of the hedgehog image, manufacturers can make a Logo collection , to enhance the details of the appearance.



Metal dust net.







Carbon one is quite satisfactory, but because of its material quality, only 3g of weight, it can be said that the basic feeling, wear no fatigue, comfort is very good, for music lovers like music, this is also One of the primary conditions for headphones selection.





A few beautiful pictures for everyone to enjoy, in general, the overall use of headphones full of materials, details are remarkable, thanks to the combination of carbon fiber and metal exquisite craftsmanship, making the weight and the hardness of the body are quite awesome, and accessories are complete For the bonus item of the apes, the LOGO of the body's back cover is not obvious enough, and the green LOGO can be used to highlight the brand awareness. In fact, the evaluation and evaluation of the photographs ended early, but for the eagerness of sound quality, it took 3 days to squat, although I do not believe this argument very much either, but I am rather convinced that it has an idea that it cannot be trusted.



Carbon One's flagship headset is a combination of U2 hybrid unit technology, which combines the low frequency and mid-high frequency of music in the dual units to make up for each other. For me, the nearly one week's downtime has long made me hungry. Through the repeated experience of the following songs, summing up the audition experience on this headset, may be somewhat subjective, but the quality of the headset in my opinion is worthy of its position.



Download the WAV source file for downtime and audition. The player adopts the default mode. 30% and 50% of the volume of the headphones and 12 high, medium and low frequencies represent the songs and pure music. Repeated play for 1 week. If it's useful, it's basically clear, and the feeling at the beginning of the ear is equal to the tri-band equalization, and the low frequency is more prominent.



The deep bass drum sound at the beginning is very impressive, deep dive into the guitar band, gives a full and natural feeling, Tsai Chin's bass interpretation gives people both sad and warm memories, people can not help but think of the encounter. Thanks for the warm memories of memories.



This david's titanium performance is quite awesome. The low-frequency performance is not full of elasticity. The low-frequency gives a strong sense of power. The overall feeling is not due to the absorption of bass in the sense of depression. Instead, it is under the action of the moving iron unit. The high-frequency performance of the vocals is more transparent, and the U2 lap iron hybrid technology of the marmosets is more prominent in such songs.


Carbon one's performance on the performance of this pure music, thanks to the dynamic metal ring of the special metal diaphragm closed the eyes of the drums, flute, streams, birds and insects, the resolution is relatively good reduction degree.



The ape monkey's iron headphones are indeed more suitable for interpreting Eason's long absence of this type of mid-bass song, and bass performance is full and deep.



This Philippine sister's sky was interpreted by Carbon one as a sounding soundtrack, and the midrange vocal performance was relatively thorough and ductile.



The degree of reduction of wolfberry and erhu is relatively high. Alto is pure and smooth.



Mis-Teeq's first Scandalous, medium and low-frequency convergence perfect, clear and clear electric sound, bass drum sound deep dive full flexibility. The sound field is well-defined, and the feeling of opening current around the circle is clear and clear.



With Carbon one playing the game, although there are moving iron units but the performance of the sound field is still not as clear as the professional gaming headphones, the performance and background sound effects are more realistic, the gunfire experience feels too dry, may be the game sound problem, after all, the resolution of the headset Still quite good.



Through these two days of deep listening to the headphones, I feel that the headset's tri-band performance has reached a relatively satisfactory level, may be based on the special metal diaphragm helper low frequency relatively prominent, the middle and high sound more transparent, good low-middle convergence, treble Extensibility is general. U2 lap iron mixing technology does have a very good balance of tri-frequency and the accessories of the product are relatively complete. If you can add some DIY wire, it will be more favored, shape and color. Personal feelings still have room for improvement.

Solder Bar

Solder Wire/bar is an indispensable material for the manufacture of electronic products .Tin wire,TIn bar and tin paste are the most widely used electronic welding materials,the technical level depends on the performance of solder joints and welding process performance.


Product specification: Ñ„12*330mm

295*20*13mm


Product Features:

Smooth surface,neat coiling,beautiful appearance,uniform distribution of additives,good continuity.

Less splash of additives in welding process,good mobility,good wettability,less smoke,less oxide slag,bright welding spots.

Widely used in a variety of wave slidering and manual welding of television,audio capacitors,circuit boadrds and communications equipment.

Including SnCu.SnAg.SnAgCu,SnAgCuSb.SnAgBi series.

Solder WireSolder Wire




Solder Bar,Solder Wire Bar,Silver Solder Bar,Lead-Free Tin Solder Bar

Shaoxing Tianlong Tin Materials Co.,Ltd. , https://www.tianlongspray.com