Sichuan News Net-Sichuan Workers Daily News China's first "Steel Industry Development Policy" was officially promulgated by the National Development and Reform Commission on July 20. Industry insiders bluntly said that this is a policy that will have a major impact on the development of China's steel industry. The steel enterprises in our province are facing a major test.
Getting started
The reporter learned from the policy that industrial planning layout, technology industry access, and circular economy are the key points. The policy proposes: through the adjustment of the organizational structure of the steel industry, the implementation of mergers and acquisitions, the expansion of the scale of the backbone enterprise groups with comparative advantages, and the improvement of industrial concentration. By 2010, the number of steel smelting enterprises will be greatly reduced, and the situation of unreasonable layout will be improved. In principle, new steel joint ventures, independent ironworks and steel mills will no longer be built separately, and independent rolling mills will not be encouraged. Maximize the comprehensive utilization level of waste gas, waste water and waste, and strive to achieve “zero emission†and establish a recycling steel plant. Before the end of 2005, the pollutants emitted by all steel enterprises meet the national and local standards, and the total discharge of major pollutants should meet the control indicators approved by the local environmental protection department. In particular, the policy puts forward clear requirements for the layout of the steel industry in the southwest region: the existing key enterprises must improve the equipment level, adjust the variety structure, develop high value-added products, determine the output with the sustainable supply capacity of ore, and do not pursue the quantity. Increase.
Stress and opportunity coexist
Recently, the reporter interviewed relevant persons of the Provincial Economic Commission. He believes that in the face of the new policy, the steel industry in our province must be under pressure. At present, there are more than 400 metallurgical enterprises in the province, including more than 10 key production-oriented steel enterprises. The province's steel production capacity last year was 12.5 million tons, and the actual steel production was 9.89 million tons. "In addition to Pangang, Chuanwei Group, etc., the steel enterprises in our province are not large, and only the Panzhihua headquarters and the Chuanwei Group headquarters can meet the required technical standards," the source said. There is another big weakness in the steel industry in our province: apart from Pangang Group and Chuanwei Group, the other steel companies have a single product structure, mainly producing long-term products such as construction steel. This person believes that the introduction of the new policy is also an opportunity. He said that after the "Ninth Five-Year Plan" and "Tenth Five-Year Plan" period of technological transformation, the province has eliminated a large number of backward productivity. According to the new policy requirements, steel enterprises can only further turn, adjust product structure, eliminate backward products, and develop High value-added products.
Wang Jin, deputy to the National People's Congress and chairman and president of Chuanwei Group, said: This policy has improved the threshold for entry and avoided low-level redundant construction, which will curb the disorderly competition in the steel industry. For the enterprise, it is undoubtedly an opportunity. In the past 8 years, Chuanwei Group has grown at an average annual rate of over 40%, and this year's sales revenue can exceed 10 billion yuan. In recent years, the company has focused on adjusting its structure and developed projects such as mining, machining, and welding materials, and has formed an industrial chain with strong correlations from mines to machinery terminals. A better step has been taken on the road to developing a circular economy. Wang Jin believes that the size of the enterprise is not important, and the strength of the competition is important. As long as the product structure is reasonable and can adapt to the market demand, the enterprise can survive and develop. Luo Zezhong, general manager of Pangang Group, said that the national industrial policy reflects the scientific development concept. The product structure of China's steel industry is very unreasonable. On the one hand, low-end products are saturated, on the other hand, high-end products are in short supply and have to be imported. This requires that the structure must be adjusted to increase industrial concentration. In recent years, Panzhihua Iron and Steel has focused on grasping the trend of national macro-policies and developed a series of internationally leading steel and vanadium-titanium new products. It has become the only manufacturer of chlorinated titanium dioxide in China and has also launched ten environmental protection projects.
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
Getting started
The reporter learned from the policy that industrial planning layout, technology industry access, and circular economy are the key points. The policy proposes: through the adjustment of the organizational structure of the steel industry, the implementation of mergers and acquisitions, the expansion of the scale of the backbone enterprise groups with comparative advantages, and the improvement of industrial concentration. By 2010, the number of steel smelting enterprises will be greatly reduced, and the situation of unreasonable layout will be improved. In principle, new steel joint ventures, independent ironworks and steel mills will no longer be built separately, and independent rolling mills will not be encouraged. Maximize the comprehensive utilization level of waste gas, waste water and waste, and strive to achieve “zero emission†and establish a recycling steel plant. Before the end of 2005, the pollutants emitted by all steel enterprises meet the national and local standards, and the total discharge of major pollutants should meet the control indicators approved by the local environmental protection department. In particular, the policy puts forward clear requirements for the layout of the steel industry in the southwest region: the existing key enterprises must improve the equipment level, adjust the variety structure, develop high value-added products, determine the output with the sustainable supply capacity of ore, and do not pursue the quantity. Increase.
Stress and opportunity coexist
Recently, the reporter interviewed relevant persons of the Provincial Economic Commission. He believes that in the face of the new policy, the steel industry in our province must be under pressure. At present, there are more than 400 metallurgical enterprises in the province, including more than 10 key production-oriented steel enterprises. The province's steel production capacity last year was 12.5 million tons, and the actual steel production was 9.89 million tons. "In addition to Pangang, Chuanwei Group, etc., the steel enterprises in our province are not large, and only the Panzhihua headquarters and the Chuanwei Group headquarters can meet the required technical standards," the source said. There is another big weakness in the steel industry in our province: apart from Pangang Group and Chuanwei Group, the other steel companies have a single product structure, mainly producing long-term products such as construction steel. This person believes that the introduction of the new policy is also an opportunity. He said that after the "Ninth Five-Year Plan" and "Tenth Five-Year Plan" period of technological transformation, the province has eliminated a large number of backward productivity. According to the new policy requirements, steel enterprises can only further turn, adjust product structure, eliminate backward products, and develop High value-added products.
Wang Jin, deputy to the National People's Congress and chairman and president of Chuanwei Group, said: This policy has improved the threshold for entry and avoided low-level redundant construction, which will curb the disorderly competition in the steel industry. For the enterprise, it is undoubtedly an opportunity. In the past 8 years, Chuanwei Group has grown at an average annual rate of over 40%, and this year's sales revenue can exceed 10 billion yuan. In recent years, the company has focused on adjusting its structure and developed projects such as mining, machining, and welding materials, and has formed an industrial chain with strong correlations from mines to machinery terminals. A better step has been taken on the road to developing a circular economy. Wang Jin believes that the size of the enterprise is not important, and the strength of the competition is important. As long as the product structure is reasonable and can adapt to the market demand, the enterprise can survive and develop. Luo Zezhong, general manager of Pangang Group, said that the national industrial policy reflects the scientific development concept. The product structure of China's steel industry is very unreasonable. On the one hand, low-end products are saturated, on the other hand, high-end products are in short supply and have to be imported. This requires that the structure must be adjusted to increase industrial concentration. In recent years, Panzhihua Iron and Steel has focused on grasping the trend of national macro-policies and developed a series of internationally leading steel and vanadium-titanium new products. It has become the only manufacturer of chlorinated titanium dioxide in China and has also launched ten environmental protection projects.
The authenticity of this information has not been confirmed by the international electrical network, for your reference only.
Strain/flex Reliefs And Grommets
the power Connectors we provide overmolding solutions and modular tooling.
We also offer to the OEM and distributor users a diversified line of strain / flex reliefs and grommets, such as Solid, Solid-Rib, Uniflex, Multiflex, in standard off the shelf or custom designs.
Overmolding the power connectors offers significant opportunities for cable improvements with higher pull strength not available with conventional backshells. Our technical staff is ready to help you from design and prototyping to small production run, assistance, and training.
Our team is ready to help with any of the following power connectors projects: overmolding mini fit jr. and mini-fit sr. connectors, , overmolded cables with micro fit terminations, sabre molded cable asemblies, amp duac overmolded power connectors, mate-n-lock power cables, power connector overmolding services, power connector molding, design and prototype of power cables across the board, small run molded power connecotrs , molded cable manufacturing, overmolding connectors for any power applications
Strain Reliefs And Grommets,Flex Reliefs And Grommets,Cable Strain Reliefs,Cable Flex Reliefs,Cable Grommets,Molded Strain Relief
ETOP WIREHARNESS LIMITED , https://www.oemwireharness.com