A while ago, I heard that Fiona made a Gigabit K2P, did not catch up with the first car of Jingdong, and found out that the goods were available directly on the official website. He quickly got on the train!
Although there is not much firmware available for the K2P, its CPU is just like the Lenovo D1. The wireless chip is new. I believe that the corresponding firmware will soon appear.
Although many people have already sunk through the map, I’m still basked in the sun.
2. The silk is under the 2 feet above, and there is a seam in the upper right corner to open the tool for you. 
Note that the k2p k-code is on the bottom right of the router, giving you the experience of scratching the prize. If it is blank, it means that 799 is not refundable! (cheat you) 
This welder is not exactly the same, the other side sticks, does not tear down, the curious classmates go to their own share of Baidu to find the map. 
Power on, the computer network cable is inserted into the lan port, etc. The dhcp is assigned to the ip and the browser is opened. Input p.to to enter the routing backend interface. 
After setting wan port and wifi to this interface, the function is seldom basic, except that you can specify the client to limit the speed of the network, there is no color feature. ddns only supports 3322+ peanut shell, port forwarding up to 10. 
Connected to a 2-level route to access the NAS under the first-level routing to try NAT performance, copy the file speed is only 32mb/s????
Turn off the dhcp and then try to insert the WAN port cable into the lan port. The speed is 100mb/s. It is basically full of gigabits.
Is the nat performance of k2p so unqualified? The iperf in the docker on the NAS and the iperf of the desktop machine are turned on and tested. The results are as follows
WAN->LAN 400 or so 
LAN->LAN 1000 megabytes no problem 
From the aspect of appearance, k2p is better than k2 material. The front metal body fits the internal chip and the heat dissipation should be much better. Others are almost the same except for the big one and small circle. The weight is obviously heavier.
Performance performance... Gigabit port is definitely a qualitative leap than k2, but this nat performance is much worse than the same core Newifi D1 (nat is close to full Gigabit), I do not know whether the official firmware has restrictions or not open hard Nat is still a problem. Looking at the current home broadband situation as the main route is barely enough, but after all, there are still a lot of people who use it as subordinate routing. (Don't ask why, many of Zhang Aunt's technical innovations are used in this way).
In the end, the price/performance ratio is still 100%! Because before buying k2, this k2p k-code will not be used directly, and he has to buy his family's currency for 6 months and 5,000 yuan for product purchase points (forced investment). However, I am still newly registered. The account activation k code, the new account has an accreditation vouchers ~ ~
As an upgraded version of K2, K2P is still necessary to start with, whether it is when the ap or when the switch is used with third-party firmware.
The cost of K2P should not exceed Newifi D1, which is about 100 points. It is obvious that the threshold for selling 799 is high. If you have already bought K1 or K2, look at the bank card number of your relatives and friends before you enter K2P. Otherwise, 799 is not fun if you don't come back...
Jingdong had just replenished the shelves before the end of this article, and you can go to squeeze the bus. If you want to buy K3, you can go to the official website to try.
Withstand high voltage up to 750V (IEC/EN standard)
UL 94V-2 or UL 94V-0 flame retardant housing
Anti-falling screws
Optional wire protection
1~12 poles, dividable as requested
960 Series Terminal Blocks,Electrical Terminal Strips,Electronic Terminal Blocks,Nylon Terminal Block,ballast terminal blocks
Jiangmen Krealux Electrical Appliances Co.,Ltd. , https://www.krealux-online.com