On March 2, 2009, the National Certification and Accreditation Administration issued a notice that the standard GB15934-2008 “Electrical Accessories Wire Assembly and Interconnecting Wire Assembly†applicable to the mandatory certification of wire component products will be implemented on June 1. The specific content of the standard is:
1. From the date of notification to June 1, 2009, the applicant may voluntarily choose to apply for certification according to GB15934-2008 standard (hereinafter referred to as the new standard) or GB15934-1996 "wire assembly" standard (hereinafter referred to as the old standard); From June 1, 2009, certification should be implemented using the new version of the standard.
2. For products that have obtained compulsory certification according to the old standard, the holder of the old standard certification certificate shall submit an application for conversion of the new version of the standard certification certificate to the designated certification body after the implementation of the new version of the standard and the next follow-up inspection. After the new version of the standard certification certificate. The conversion of the old version of the standard certificate shall be completed by June 1, 2010. If the certificate of the conversion is not completed within the time limit, the certification body shall suspend it; if the certificate conversion work has not been completed before September 1, 2010, the certification body shall cancel the old standard. Certificate of certification.
New standards for household and similar plugs, rubber insulated cables, etc. have been released or implemented in the near future, and relevant institutions have also initiated certification work for standard revisions. For household and similar use plugs, rubber insulated cables and other products have obtained the new version of the mandatory certification of the wire assembly products, no need to carry out supplementary test, after confirmation, can directly renew the certificate according to GB15934-2008 standard. For household and similar plugs, rubber insulated cables and other products that have not yet obtained the new version of the mandatory certification of the standard, it is necessary to supplement the difference between the household and similar plugs, rubber insulated cables and other products (differential testing items see corresponding The product compulsory certification standard is changed to the specific requirements. After the test is passed, the corresponding wire component products can be renewed according to GB15934-2008.
Third, because the new version of the standard has clearly covered the "interconnect wire assembly" product in the appliance certification coupler (home and similar use) in the compulsory certification catalog, and the product is also under revision from GB17465.2-1998 "Household and The second part of the appliance coupler for similar uses: the interconnect coupler for household and similar equipment, the standard (the original applicable standard for the interconnection of wire components), referred to as the original applicable standard, is removed. Therefore, the "interconnected wire assembly" products from the date of notification until June 1, 2009, the applicant can voluntarily choose to apply for certification according to the new standard or the original applicable standard; since June 1, 2009, "interconnect wire The component "shall implement a mandatory product certification using the new standard. At the same time, the applicable rules for "interconnected wire assemblies" are changed from the "Household and Similar Appliances Coupler Implementation Rules" (Implementation Rule Number: CNCA-01C-006) to the Wire Assembly Implementation Rules (Implementation Rule Number: CNCA- 01C-001).
For “interconnected wire assembly†products that have obtained compulsory certification according to the original applicable standards, the holder of the original applicable standard certification certificate shall submit a new version of the standard certification certificate to the designated certification body after the implementation of the new version of the standard and before the next follow-up inspection. The application and acceptance of the whole project test carried out by the laboratory according to the new version of the standard, after the qualification, the new version of the standard certification certificate. The conversion of the original applicable standard certification certificate shall be completed before June 1, 2010. If the certificate of the conversion is not completed within the time limit, the certification body shall suspend it; if the certificate conversion work has not been completed before September 1, 2010, the certification body shall cancel the original Applicable standard certification.
4. Since the new version of the standard only stipulates the wire assembly in the form of “one for oneâ€, the wire assembly of the “one to two†form in the old version of the standard has been removed from the standard, and the national standards corresponding to the products have been included in the relevant standards. The formulation and revision of the national standards is underway. After research, it was decided that the “one-for-two†wire assembly was suspended from accepting compulsory product certification, and the relevant certification and law enforcement work requirements were to be notified after the implementation of the corresponding national standards.
5. For products that have obtained CCC certification in the form of “Conversion of Original Electrical Product Safety Certification (CCEE) to CCC Certificateâ€, if a complete and valid CCC type test report cannot be provided, the full-scale type test shall be carried out in accordance with the new standard.
6. For certificated products that have been manufactured before the market on June 1, 2009 and are no longer produced, no certificate conversion is required.
7. All relevant designated laboratories shall report to the Commission before May 31, 2009 the testing capability according to the new edition standards, and report and confirm the qualifications of the laboratory qualifications as soon as possible.
Editor: China Lighting Network - Wheat
Antenk offers flat cables from its own production – the location of the in-house Flat cable production is the antenk factory in shenzhen,Made in China. The FLAT CABLES are produced with latest state of the art production facilities and fulfill the Automotive standards.
Flat cable is a standard organization and is suitable for mobile electrical equipment with AC rated voltage of 450v/70v and below. Flat structure is especially suitable for frequent bending occasions, without kinking and folding neatly, such as driving. Yb, YBF and YBZ products can meet the needs of various occasions. It is suitable for the electrical connection between mobile electrical equipment in the harsh environment of power generation, metallurgy, chemical industry, port and so on.
Flat Cable
ShenZhen Antenk Electronics Co,Ltd , https://www.antenkcon.com