OK, now it's time to fill the old pit.
Although 303 has been installed, it always feels like it is missing, and let's do it slowly.
This machine was a machine that helped relatives in September last year. With 2,500 monitors, requires more than 23 inches of non-TN screen (self-request), can play LOL, hip pioneers and other popular fried chicken. The amount, with the camera when it did not watch Pioneer this game, however, with the help of the 2400 high frequency, playing a smooth or completely no problem, it really wants to play cool, or add block 370X it.
This case is equipped with an APU's ITX platform, and it has a core display platform with certain game capabilities.
It will also provide a simple and effective 12V fan to 5V power conversion strategy.
Behind the release of a wave of links for downloading some activation tools (not guaranteed to activate, try it yourself, it should not tamper with the home page, you can try to use the upgrade method pony, after all, the pony is to change the home page virus of)
As usual, put a wave configuration diagram
Configuration table:
CPU: 7650K box
Memory: Team Vulcan High Frequency DDR3 2400 8G (4Gx2 Kit)
Motherboard: Biostar Hi-Fi A88ZN (AMD ITX motherboard is optional, Gigabyte is too expensive)
Solid State: A-DATA SP920 128G
HDD: Disassemble Western Digital 320G
Power Supply: Antec VP350P
Chassis: Liren D3
Display: ViewSonic VA2349s 23-inch AH-IPS hard-screen wide-angle LED-backlit LCD monitor (now nearly 100 cheaper than when it was bought, and the 2449S is significantly more cost-effective)
AMD has had a tendency to stand up this year. The zen framework looks very good and powerful, but the actual situation still depends on the launch. But for now, AMD is worthy of a match, only the cheap APU platform. So you want to spend the least money to achieve the balance of game performance and CPU performance, then on the APU it.
We often say that why Intel uses high-end CPUs for high-performance CPUs and low-end Us for low-end CPUs. It stands to reason that high-end CPU users will definitely have to stand alone. However, the toothpaste factory is such a cow. As the CPU hits Nvidia, the GPU is kicking Intel's big farmers. It seems to have heard people's voices and integrated the strong nuclear performance into their own CPU, named APU. By this generation, A8-7650K (384 streams) Processor), A10-7800 and even higher 7870K (512 stream processors), with high-frequency dual-channel DDR3 can achieve a better performance level (should be close to the GT740 level it). And because GCN architecture and AMD's desktop graphics as the same modular architecture, so in the future for a long time can be AMD's video driver continuous addition optimization, playing games can definitely step on Intel. The intel's core shows that it is indeed an improvement to run the sub-data now, but it is limited to the weak driving ability. The ten successful forces can only play 70% to 80%, and it is very poor for some large-scale stand-alone games (of course, most of the single units are connected Can't open it.) So APU is still very own space (think again, the DIY world has spit to the toothpaste factory countless times, high-end I7 with high-end nuclear, low-end I3 Pentium with low-end nuclear was a stupid dog The practice, how to play I7 not alone on the show, get a low-end nuclear display can reduce the cost point, the real need for high-performance nuclear display some of the low-end configuration player, and can only endure the Pentium I3 that castrated version of It's stupid to check it out, of course, there is still a choice, five generations of CPU, I5-5675C equipped with the history of the strongest Intel nuclear display, but also a good choice for a nuclear display platform, at least running on the already flat APU, However, Taobao is relatively scarce in supply, after all, transitional products).
The large article was finished daily. Because there was no such detail at the time of shooting, there was no unpacking chart. See the installation process one by one.
The first is the chassis, which is a small chassis. It's strange to talk about the Liren brand. If you want to imitate Qiao Sibo's path, but it hasn't gone down firmly, and you've recently been on the HTPC route, you have to say that Liren is still a bit of a skill in the aluminum chassis. (HTPC also has to use the aluminum chassis ah) here is an ITX chassis that should be D3 (There are still D3S, just the difference between the switch button), the architecture is relatively old, the overall structure and Joe Sibo C2, but two The difference leads to a difference between the duct and the C2 quality. First, the power source is oriented. From the figure, it can be seen that the power inlet is on the outside and C2 is on the inside. The suction from the inside is already good, but the problem lies in the CPU. Radiators can create wind-impact problems and reduce efficiency. The second is to open the hole at the top and set up a 12CM fan tray. Combined with the design of the bottom air intake, a good chimney vertical air duct can be formed, which effectively discharges heat and prevents the production of stuffy cans.
We can see, C2 this product is brushed aluminum surface in both parts, although it looks good, but can not afford ITX chassis cooling capabilities, the last one alone will make you crazy crazy, for the 7650K to Said that because of not locked, TDP is still high.
After recognizing his own problems, Qiao Sibo actually made a compromise. In the V3+ and V2 and V4, which were later introduced, the entire side plate was punched to create a cooling space, and the power supply air was set to face outward. Limits the height of the CPU heatsink, but at least the power inlet does not catch the wind with the CPU.
This architecture is regarded as a relatively common architecture. I entered the DIY circle relatively late, and I was relatively LOW. It is estimated that these are also the frameworks of the XLQ ABEE chassis manufacturers, but I also buy those tall products. Can't afford it. So, for the time being, let's make a comparison with Qiao Sibo. This article does not entangled anyone who copied it.
The chassis can be opened on three sides. It is convenient for the overall installation. The front frame is fixed on the front IO, and a 12CM fan frame is reserved to facilitate the formation of vertical air ducts. The bottom is also left with plenty of ventilation holes. As we all know, aluminum is soft, so a large part of the aluminum chassis uses outer aluminum inner steel to increase strength with steel as a skeleton.
AMD's ITX motherboards are harder to find. The more widely spread first-tier and second-tier brands are also the only ones, such as Gigabyte and Biostar. Gigabyte has a high price and Jingdong is out of stock. So this time, choose Biostar, this board is for music. HIFI features. Truthfully, in the case of Elite Abit, etc., gradually withdrawing from the motherboard community, other motherboards can only rely on reducing the price of the motherboard. For instance, Biostar can follow the trend and keep the bottom line of the second-line motherboard brands. The concept of differentiation brought about by this HIFI motherboard has been indispensable for finding a place. Although the price is indeed cheaper than that of the ASUS Gigabyte, it is still comparable to the colorful ones (I refer to the miserably red motherboard). .
There must be a cargo link
On the whole, this motherboard is still good, and the materials used are very good. With a good radiator, it can still be a super one. On the right is the boxed 7650K, boxed is also the price of 500 or less, performance Well multi-core and I3 can be aligned, single-core weaker than Pentium, but daily use should still be able to meet.
The original heat dissipation of aluminum heat is generally the same. The fan speed was impressive, and the noise was relatively large. At that time, a young mistake was made. Later, the cooling system was replaced with the cooling down of other models.
CPU as shown
After installation, you can see that this Mimi's small 8CM fan is the source of all noise, and the overclocked 7650K is completely delusional.
Since there is no side-to-side element, everything is based on the price/performance ratio. Of course, I still won't use the black workshop products. The Vulcan DDR3 2400 2X8G kit is selected here, and the brand is reliable. At that time, the dog's price was lower than that of the bare bar. (Of course it's more expensive than it is) It's worth choosing.
After the memory slot is fully inserted, the main board can be fixed. Shiyan This vest is about the same height as the bare bar, and it is compatible with the best heat dissipation.
Show the solid state, in September last year, A-DATA only a solid state is worth buying, is the SP920, this is the famous famous M510 vest version (and the famous M550 only cache capacity difference), Just branded, the horse brand control plus original MLC particles of magnesium, the quality is very reliable. A-DATA's other solid-states are often unable to guarantee the original particles. This memory-starting company always likes to purchase wafers and labels, and the quality is not reliable. I don't think NAND particles are as reliable as the original ones. White film is possible. On the left is to buy a fan of overclocking a 6CM, 12V speed directly exceeded 4,000 rpm, noise 1B, as the helicopter took off, was finally changed to 5V, the problem is solved. On the right is a disassembled Western Digital blue disk, which does not count the total cost.
There is a sentence to say, my version is still silver aluminum shell, it seems that the current SP920 is already a black shell, I heard that the main control or the horse brand, but shrinking, the particles just checked, has been replaced by A-DATA self-made The standard particles, according to the online statement, the basic white film did not run. Therefore, it is not recommended that everyone read this to buy SP920. If you really want to buy A-DATA, I think the SP550 can buy one, only entry-level cost-effective players. I personally have no prejudice against the TLC, SP550 see the dismantling be used with Hui Rong SM2256 master with Hynix TLC, TLC particles, Samsung's particles started early, or good, Toshiba SanDisk this also Yes, Hynix is ​​a representative of low-cost high-performance, TLC particles performance is very good, Micron's TLC performance is a bit poor, the first generation of TLC, BX200 can not bear to see, continuous read and write even mechanical hard drives are not as good. Therefore, it is advisable to wait for the next generation of magnesium particles. Back to the SP550, using the public version of Hui Rong with Hynix's program, this set is personally still very accredited, and now there are several TLC adoption, I think it's good, to your belief in Intel's new 540 used It is also a 2256+ Hynix TLC, and dares to provide a five-year warranty, which may have concerns for the TLC. Of course, there are group 3110 with Toshiba 15nm TLC particles, much better performance than the previous 19NMTLC, OCZ TR150 Toshiba Q300, are using this program, it is also worth recommending.
Back to this chassis, the hard disk is installed at the bottom, and there is a cushion pad attached, which still takes into consideration the problem of avoiding resonance. If you don't install a video card, you can also install multiple hard disks by using the hard disk holder of Liren.
Amway to use this multiplayer L04 to build the L04. It is easy to install multiple hard drives in an inexpensive all-aluminum chassis to achieve NAS functionality without spending a fortune on a dedicated NAS chassis. It is measured that Qiao Sibo C2 does not hold the video card, can hold 4 3.5 plus a 2.5 hard drive.
My favorite collection of NAS assembly articles, the earliest recommended L04 this thing plus ordinary chassis to create multi-drive NAS.
The top of the fan was left in a relatively thin position. At the time, the fan of the 12038 would be too thick, so Joe Schoby chose a thin fan.
Power used the classic Antec VP350P, Delta NX350 with the program, it is now recommended to buy Delta, because it is said that the fan is better and more quiet, I believed ~, but the VP350P is very quiet when running, but also can be selected At the same time, this power supply has no problem with a 750TI 950-class graphics card with sufficient margin. As long as the chassis is plugged in, it must be shorter than a 200-mm short card.
Because it is not a side-by-side chassis, it does not pay too much attention to internal routing. At that time, the level is not as good as that of the old driver. However, the overall bundle is still in line with the overall trend.
IO circumnavigates the entire motherboard for a long lap. I don't know why such a small chassis IO line stays so long. Remember to install the fan before installing the power supply.
The hard disks are fixed on the base and the extra lines are tied to the bottom without affecting the overall air duct.
Complete and stamp the last picture.
There is no separate close-up, so take a look at this overall rendering. It can be seen that the overall contraction is at the corner of the table and a small speaker (avoiding the fan outlet) is placed on top of it. The whole should be quite compact. ViewSonic display, in addition to the appearance of a bit ugly, the overall display is still good. Like to discuss with DIY can discuss together Ha: 31 two 74 three 588. Twisting House Small Group
The following will show you the effect of dual-channel high-frequency memory on the nucleus.
The nuclear display is generally not equipped with independent video memory (except for Intel's sharp-core series of nuclear top-level models). The memory speed is not a bottleneck for the CPU hard drive, but for the graphics memory, the throughput speed is still insufficient, so high-frequency DDR3 or even DDR4 memory becomes the first choice.
After installing this set of APUs, I also used entertainment masters to entertain a bit. The APU is in entertainment masters. The CPU score is of no reference value and is much higher than my own 4790K.
We can see that in the dual channel of the original DDR3 1333 frequency, the score is 1W7 (single pass I will not measure, at least less than 30%)
Open XMP and increase the frequency to 2400. The score will break 20,000 and increase by 20%. It can be seen that double-pass high-frequency slivers are very helpful for the performance of nuclear
As mentioned earlier, ITX motherboards have limited fan slots and do not necessarily support the use of multiple fans. The main advantage of the mainboard fan is that it can adjust the speed, whether it is 4PIN PWM speed control or 3PIN DC speed control. So I have said that this computer has an extra 6CM fan installed. The speed is too high. It is too loud. Because the power supply fan must be 12V full speed, then what else can be done besides the speed reduction resistor? Effectively reduce the fan speed to achieve a silent effect, the answer is some simple gadgets.
In terms of tools, we only need a thick sewing needle, a small screwdriver, or tweezers, or any other fine, fine-grained item. This is believed to be hard to find.
The common fans on the market are these two interfaces. The left side is a 3pin interface with speed measurement, and the right side is a 4pin D-type interface without speed measurement.
We can see the red, black, and yellow lines. The speed line is yellow. Normally, the red line is zero and the red line is a positive voltage. The black line is grounded.
First of all, we will talk about how to reconstruct a small 3pin fan.
Use a tool to press down on the card opening on the 3pin plug while pulling the corresponding wire back with your left ring finger and small pointing.
It's easy to pull it out. The red wire (positive) and black wire (negative)
Then insert the two wire metal contacts into the circular tube-shaped metal terminal of the power D-type plug. The metal sheet at one end of the fan may be slightly wider. It does not matter, as long as the wide part is aligned with the gap of the tubular terminal of the D-type plug.
Because the original 3pin pin has shrapnel, it will not easily fall out after it is inserted. Be sure to insert the metal piece at one end of the fan fully into the D-type plug. Do not expose the metal to prevent inadvertent short circuit.
If you want to connect 5V to reduce the fan speed to about 40% of the original speed, connect the red (positive) metal plate of the fan end to the red (5V) terminal of the D-type plug, and connect the fan black cable (negative). Any one of the two black lines of the D-type plug can be used. Here is the large D port that comes out of the power supply. The non-module power supply is obviously one side red and yellow, where red is +5V and yellow is +12V.
Later on is the transformation of the large D port, the same principle, the first red hole out of the hole into the fourth hole, and then connected to the power D port on the line. As for how to take it out, I cut it in half with scissors. It should be the best, and it should be a clip.
The above is the main content of this article, the next one is also a box for people to establish, and this is very similar, but can be installed under the MATX motherboard, scalability greatly increased. However, when I didn't think I wanted to send a document when I was in fashion, the photos would be relatively small and the content would be simple.
How to install the system please refer to the previous one
In the end, the recent work was busy and I didn't have much time to write, but I had accumulated a lot of material on hand. I hope that the little guys interested in DIY and peripherals will pay more attention to subscriptions. To explore the discussion Kazakhstan ~).