Shape of Core: Ring
Origin: China
StandardsGB 1094 power transformer
GB/T 15164 oil-immersed power transformer load guide book
GB/T 6451 three-phase oil-immersed power transformer technical parameters and requirements
GB 2536 transformer oil
GB 311.1 high voltage power transmission and transformation equipment insulation coordination
JB/T 501 power transformer experimental guide books
GB 10237 power transformer insulation level and external insulation insulation experiments of air gap
DL/T 572 transformer operation procedures
1,,,,,.
2,,500kVA.630kVA,.
3,Dyn11,,.
4,,,,.
5,.
,,,,.
Product features
1. Transformer core uses the import high quality cold rolled silicon steel sheet pile, and greatly reduce no-load loss and no-load current, and the core are binding, guarantee the iron core of compactness, and reduce noise.
2. High and low voltage winding with oxygen frees copper winding, low voltage winding double cylinder structure is used to 500 kva and below. More than 630 kva and adopts double helix or four helical structure, high voltage winding adopts multilayer cylindrical structure.
3. Transformer connection group uses the Dyn11, reduce the influence of the harmonic of power grid, and improve the quality of power supply.
4. Transformer is fully sealed structure, prolong service life, avoid hanging core, maintenance free.
5. The measured noise value is lower than the standard.
This series transformer after normal transportation, do not need to lift core check, can install the relevant parts and components, project acceptance test, after qualified can be put into operation.
1,:+40ºC
2,:-25ºC
3,:<1000m
4,:90%(20ºC)
5,:,,,,.
      Conditions of use
1. The highest temperature: + 40 ºCÂ
2. The lowest temperature: 25 ºCÂ
3. Altitude: < 1000 m
4. The highest monthly average relative humidity: 90% (20 ºC)
5. Installation location: installed in no fire and explosion danger, serious foul, chemical corrosion and the site of violent vibration, indoor or outdoor.
S1110kV:S11 type 10 kv double winding series main performance parameters of the products
Type |
(KVA) Rated capacity |
Connection symbol |
(KV) Voltage combination |
(W) No-load losses |
(W) Load losses |
(%) No- load current |
(%) Short-circuit impedance |
||
H.V |
Tapping range |
L.V |
|||||||
S11-M-30 | 30 | Yyn0 Dyn11 |
6 6.3 10 10.5 11 |
±5% ±2×2.5%  |
0.4 | 100 | 600 | 2.3 | 4.0 |
S11-M-50 | 50 | 130 | 870 | 2.0 | |||||
S11-M-63 | 63 | 150 | 1040 | 1.9 | |||||
S11-M-80 | 80 | 180 | 1250 | 1.9 | |||||
S11-M-100 | 100 | 200 | 1500 | 1.8 | |||||
S11-M-125 | 125 | 240 | 1800 | 1.7 | |||||
S11-M-160 | 160 | 280 | 2200 | 1.6 | |||||
S11-M-200 | 200 | 340 | 2600 | 1.5 | |||||
S11-M-250 | 250 | 400 | 3050 | 1.4 | |||||
S11-M-315 | 315 | 480 | 3650 | 1.4 | |||||
S11-M-400 | 400 | 570 | 4300 | 1.3 | |||||
S11-M-500 | 500 | 680 | 5100 | 1.2 | |||||
S11-M-630 | 630 | 810 | 6200 | 1.1 | 4.5 | ||||
S11-M-800 | 800 | 980 | 7500 | 1.0 | |||||
S11-M-1000 | 1000 | 1150 | 10300 | 1.0 | |||||
S11-M-1250 | 1250 | 1360 | 12800 | 0.9 | |||||
S11-M-1600 | 1600 | 1640 | 14500 | 0.8 | |||||
S11-M-2000 | 2000 | 2280 | 17820 | 0.6 | 5.0 | ||||
S11-M-2500 | 2500 | 2700 | 20700 | 0.6 |
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
Â
S1120kV:S11 type 20 kv double winding series main performance parameters of the products
Type |
(KVA) Rated capacity |
Connection symbol |
(KV) Voltage combination |
(W) No-load losses |
(W) Load losses |
(%) No- load current |
(%) Short-circuit impedance |
||
H.V |
Tapping range |
L.V |
|||||||
S11-M-30 | 30 | Dyn11 | 20 | ±5% ±2×2.5%  |
0.4 | 90 | 660 | 2.1 | 5.5 |
S11-M-50 | 50 | 130 | 960 | 2.0 | |||||
S11-M-63 | 63 | 150 | 1145 | 1.9 | |||||
S11-M-80 | 80 | 180 | 1370 | 1.8 | |||||
S11-M-100 | 100 | 200 | 1650 | 1.6 | |||||
S11-M-125 | 125 | 240 | 1980 | 1.5 | |||||
S11-M-160 | 160 | 290 | 2420 | 1.4 | |||||
S11-M-200 | 200 | 330 | 2860 | 1.3 | |||||
S11-M-250 | 250 | 400 | 3350 | 1.2 | |||||
S11-M-315 | 315 | 480 | 4010 | 1.1 | |||||
S11-M-400 | 400 | 570 | 4730 | 1.0 | |||||
S11-M-500 | 500 | 680 | 5660 | 1.0 | |||||
S11-M-630 | 630 | 810 | 6820 | 0.9 | 6.0 | ||||
S11-M-800 | 800 | 980 | 8250 | 1.8 | |||||
S11-M-1000 | 1000 | 1150 | 11330 | 0.7 | |||||
S11-M-1250 | 1250 | 1350 | 13200 | 0.7 | |||||
S11-M-1600 | 1600 | 1630 | 15950 | 0.6 |
Â
Â
Â
Â
Â
Â
China producing white color fluted candles/veals/bougies .merchandise bougies it is made by 100% paraffin wax and stearic acid .
the packing usually polybag .color design .and brown kraft paper .client can choose .
candles are pure white color candles ,and very strong .
the candles price is very best because we are making and export .
any inquire pls be free to contact with me
55 Gram Fluted Candle,75 Gram Fluted Candle,Decoration Fluted Candle ,Champagne Flute Candles
Shijiazhuang Zhongya Candle Co,. Ltd. , http://www.zycandlefactory.com