| Solar panel | 5.5V 280mA/1.55W |
| Battery | 2*3.7V 2200mAh ,size:18650 lithium battery |
| LED | High luminance 66 pcs 2835SMD |
| Lumens | 350-370LM |
| LED color | White/warm white |
| PIR | PIR montion sensor,120 degree wide angle detection,detection range 10-12m |
| Operating mode | 3 different lighting modes |
| Material | ABS+PC plastic |
| Work time | Can work over 10hrs and light brither montion 15/30 seconds when human beings come near |
| Switch | TouchPad technology,Operating mode:OFF/1/2/3 |
| Waterprrof | IP65 |
| Install way | Screws |
| Product Size | L305×W105×H48mm |
| Warranty | 12months |
| Color box | 31*11.5*5.5CM |
| Net/pc | 500G |
| Carton/pc | 50PCS |
| Carton size | 65*33.5*35CM |
| N.W./G.W. | 27KGS/28KGS |
Â
Bidirectional DC Power Supplies
The BPS series of bidirectional programmable power supplies are high-precision, low-ripple and fast response speed bidirectional DC Power Supplies with an all-digital signal control loop designed by iDealTek-Electronics based on IGBT high-frequency switching technology and bidirectional AC/DC topology architecture.
Different from the traditional DC power supply which only has constant voltage and constant current working modes, this series of programmable bidirectional AC DC power supplies have both power supply and load characteristics. It has multiple working modes of constant voltage, constant current, constant resistance and constant power, and can realize dual quadrant operation to allow the energy of the measured object to be fed back to the power supply. And Bidirectional AC-DC Power Supplies have built-in function generator, can freely generate arbitrary waveforms.
This Bidirectional DC Power Supplies are featured for high reliability, efficient setting function and complete protections, also supporting the requirement of parallel connection of multiple-units to achieve output power rating expansion, making this bidirectional power supply the best choice for the cutting-edge application industry for automated testing, automotive production line manufacturing testing, photovoltaic plate aging testing and various DC power supplies.
This series of bidirectional DC power supplies adopt active power factor correction technology, which is specially designed for typical 380V and 480V AC two-phase or three-phase alternating current with the rated output power ranging 5KW / 10KW / 15KW, the maximum output voltage ranges from 80V to 2000V under different rated powers, and the bidirectional power can be flexibly adjusted. It can output a higher voltage at a lower current or a higher current at a low voltage while maintaining within the maximum rated power range.
Bidirectional DC Power Supplies, Bidirectional Power Supplies, Bidirectional AC-DC Power Supplies, Bidirectional AC DC Power Supplies, Bidirectional Programmable Power Supplies
Yangzhou IdealTek Electronics Co., Ltd. , https://www.idealtekpower.com