Since the beginning of his second son, NG has been the NEXUS party. He feels that the native system is clean and easy to use, and does not need to use regular anti-rogue integration software. Of course, domestic customization has greatly surpassed the original in a lot of humanized functions, but for some psychological reasons, personally, it still prefers to use native language, and has always insisted on using the NEXUS series (in fact, there are still One reason is that this series is relatively niche. He shows (ga) qu (gua).
NEXUS 6P is the last mobile phone in this series. Qualcomm 810, this well-known stove, is also a big consumer, ah, the 3450's battery will not take long, there is no concept of life, N6P also two years More, even if there is no battery door, normal battery loss is about -70% or so, not to mention that some of the winning 50% of the amount of electricity on the random shutdown, but no new mobile phone, 810 anyway, performance Still enough, this is not, the summer has passed, the winter hand warmers can be saved, anyway, with the machine in the end, I feel that for the N6P for a battery, but also fight for another year.
So began to learn through the various forums on the Internet, combined with disassemble video, because the wife and the wife are two machines, to change will have to change two, with his own cell phone first to do mice, OK, then give the wife to change, In a short period of time, I changed two sets, combined with the experience of the Internet, or ready to sum up and give other friends a reference.
If a worker wants to do something good, he must first sharpen his tools and come to a comprehensive overview of the tool:
Mobile phone (this is not nonsense, no mobile phone you change hair ah)
Flashlight (alternate, light fill may be used occasionally to remove small details)
Knife (I try to use ordinary household tools, most people will not demolish the demolition, buy what sucker split screen, scalpel or something, I think it is not necessary)
Batteries (side screwdriver, tweezers, and tilts are all battery-powered)
A 9-piece tool kit for a forum is easy to use.
hair dryer
Membership card (in the video there is a playing card, but I don't think I'm a boss anyway. There's no such technology. Look at you!)
Of course, when the tools are first prepared, it does not mean that they must all be used, but personally think that they must basically be complete. In fact, there are two hidden characters above. Everyone finds that there is no. One is. . . . . . . . . Mats (No way, the table is occupied by a widow to play in the computer...) The other is the white foam underneath the mobile phone (In fact, this is also very useful, the mobile phone is put up, non-slip, this bubble is also sent by the battery, if not, you can also Use other things instead)
Since it is to change the battery, I still say about the choice of battery, according to the search in multiple forums, the official is basically not provided by the original electricity (except the internal channels, the general people have no chance is not), then Taobao certainly have the original Electricity, but I think the average person has no way to identify the high imitation is certainly there, and the amount is not small, since this is the case, then simply buy a brand of third-party batteries, so that, relatively speaking, the reliability will be higher There are also several brands, according to their own choice, I chose a cheaper one.
After starting the dry goods, the difficulty of dismantling the foreign evaluation is 2, let us step by step to crack the story (forgive me for telling, because the daughter-in-law just under the command to replace, the other will not care, I have to use even when the mouth is open On it, it is impossible to photograph the whole process....
First, remove the card tray and remove the SIM card
Then, as in the tool picture, face down, place the phone on top of the white foam, and put it on the top without slipping for a while.
The next step is to get a hair dryer. The best hair dryer is a flat mouth. Here is a picture below. I first chose to directly dry the glass above the camera, from the beginning of the hard, anyway, they must be removed. The experience here is to rest assured that using a hair dryer to evenly heat the glass, look at your watch, which is basically zero distance and more than four minutes. Then use a utility knife and insert it forcefully from the right side of the bottom of figure 1 below, insert the edge and curl it, as long as the front blow is according to what I said, basically 99% didn't ask him, can lift the glass a little, this time Hold it steady, use it to get stuck in it, and gently scrape it upwards. Don't worry about the whole process. If you feel wrong, stop immediately and go for a haircut. I had two machines that were perfectly removed and there were broken pieces of glass in the wood.
When the glass is down, it's time to go below: Just like the picture below, facing the blow is, the time is similar to blowing the glass, and then use the sharp corner of the blade to pick from the edge, stir it up, then slowly insert it, and then It can be pulled up at once.
Up and down, take it off, remove the screws These are pediatrics, and after the screws are removed, the second problem is to separate the back cover.
The separation of the back cover, like the video on the Internet, starts from the end of the plug (I'm at the end of the plug, the knife at a distance of 1.5CM). At this time, I suggest using a flashlight to look at the edge and back of the screen. On the edge of the cover, use a utility knife and do not cut the corners. Slowly and slowly, and gently tilt the screen, the screen will be tilted. The rest of the video, just like the video, is easy to separate with a warp film and with both sides curling up.
After separation, the battery cable has a cover, you need to remove it, and then remove the battery and the screen cable. With membership card, insert this position:
This position is inserted into it, gently and forcefully, slowly moving towards the end of the plug, shift to this point to force forward, and the battery is easily removed.
At this time, basically a big success. Take a look at the battery we removed:
In the end, there is basically no difficulty:
Installed in this way, it is recommended to boot the card, the signal is not normal, when I first removed, the antenna inserted under the plug broke, the signal is super bad, and later only after a new Taobao replacement Only normal. Otherwise, if you break it up and remove it, it will be very troublesome.
There is no problem with the test, you can all back to the equipment, do not say full of blood resurrection, at least N6P can now call chicken blood.
Finally, to sum up, compared to the IP4 second son, four sons and so on that I have done before, the difficulty of dismantling the N6P does have a qualitative improvement. Perhaps it is the sequela of the now popular one-piece machine. The closer the assembly, The more difficult it is to disassemble. The most comprehensive online feedback is to remove the glass breakage on the back cover. Emphasize that the temperature must be in place. Only when the temperature is in place, it is possible to soften the glue before it can tilt the glass. Basically, I give Blowing time is the bottom line and can be extended appropriately. The second difficulty is the separation of the back cover and the screen. In any case, I basically didn’t see someone in the forum who used the split screen to succeed. Conditional tests can be performed on a good quality point. The position is still the one I described above. Location is the entry point. It is rather a good battery to take, better than the previous four son's battery. . . .
After changing the battery, the most obvious is that the battery life is obviously stable. Basically, it can be sustained during the day, and it will be shut down for at most half a day. However, the continuity of follow-up use is not something that can be seen in one and a half. However, I am preparing for a year and it is almost time for a new son. Ha ha.
Finally, I wish the oil that needs replacing the battery is going well. The N6P is actually a good drop. . .
Memorize my last NEXUS phone in this article alone.
Come D version with love! ! !
FTTH Fiber Optical Fast Connectors
Fiber optic fast connector designed for FTTH. It is a new generation of fiber connector used in assembly. It can provide open flow and precast type, which optical and mechanical specification meets the standard optical fiber connector. It is designed for high quality and high eddiciency for installation, the structure of crimping position is a unique design. The hotest products are SC/APC Fast Connectors and SC/UPC Fast Connectors.
FTTH Fiber Optical Fast Connectors,FTTH SC/UPC Fast Connectors,SC/APC Fast Connectors,LC/APC SM Fast Connectors
NINGBO YULIANG TELECOM MUNICATIONS EQUIPMENT CO.,LTD. , https://www.yltelecom.com