MasterWatt Lite 500 installed test configuration
CPU: ryzen r7 1700
Motherboard: B350ET
Power Supply: MasterWatt Lite 50
Hard Disk: Toshiba 240+ Western Digital 500G Blue Disk + Western Digital 500G Green Card Graphics: XFX 470D Black Wolf Memory: All Color Strips 2666
Chassis: Matheson 1
First, the outer packaging, simple kraft paper, the cost is not high but looking very simple and comfortable, before the demolition of a certain brand of nuclear power seems to be the same packaging packaging itself has been more intuitive to illustrate the characteristics of this power, 500W, 80plus, Flat full module line and eye-catching three year replacement.
Said 500W power supply on the market. In the process of continuous progress, continuous improvement of technology, power consumption is constantly decreasing, 500W
More and more become the mainstream power options. Many people’s first reaction is basically Zhenhua or Haiyun, but the 500-price half-module also discourages many players with limited budget.
This power supply itself can be said to fully meet the needs of players, 300 less than the price, more reliable brands and the right price, is still very good.
The detailed parameters of the power supply are printed on the back.
After opening the box, the first thing that catches your eye is the cool mother's warranty card. On the right is the module line and the power cord. This power is still recommended to buy the dog East, three-year replacement + after-sales service is still very temptation.
Simply speaking of the next module line, the work is not as good as the first-line big name, or some glitches. The wires are respectively a motherboard 20+4 Pin, a CPU4+4 Pin, a PCI-e6+2 Pin, a D Pin 4 Pin, and a SATA cable. The length is as follows. The general mid-tower chassis is completely free from problems.
The power supply itself is completely wrapped in a thick black foam, and there is no need to worry about transportation problems. It may be the case that the outer packaging material is saved, and the internal protection is not bad. (Perhaps it's for convenience)
Take out the power, the front is just like the outer package, the introduction of the whole English, forcing is not low. You can see through the 80Plus white card test, the shell is still very fine. 150x140x86mm, most chassis installation is OK
The front can see that the power supply adopts the single-channel 12V design, +12V is 38A, can reach 456W. Any single card is not a problem and it can fully meet the needs of players.
The fan is a temperature-controlled 120mm HDB hydraulic fan fan, which can be seen from the outside inside the internal structure, the design of the entire Taiwan Department of capacitance, even if the demolition, but also can not tell a flaw.
Module interface, not much, but enough.
Originally, this trial was intended to use its own machine. As a result, the motherboard was difficult to decide. Fortunately, just to help colleagues set up an AMD machine, directly use this power, but also to the friends to make a reference.
As for the source of colleagues' machine accessories, wait and see if anyone can see it.
Installed memory, all the 2666. I don't know if anyone knows the origin, and this market can't be bought. The use is not bad, X99 platform 3000 1.2V can enter the system, 1.3V 3000 stable operation.
Graphics card, 470D black wolf.
Red, green and blue hard drives, Toshiba 240G solid state + 500G green plate + 500G blue dish.
Heat dissipation, RYZEN original fan, CPU 1700
Motherboard, Biostar B350ET2, power supply all three MOS, graphical Chinese BIOS, support RGB fan control, slightly better than the Rainbow Tomahawk.
After the power supply is installed, the backside, flat module line is still more convenient.
This is an error demonstration. Remember to let the CPU power supply cable reload the motherboard in the past.
Too lazy to tie up, once lit.
Overclocking universal 1.2V 3.7G, original fan is not a problem.
Because colleagues are eager to take home and play games, it is an installed experience. In fact, there is not much installed process.
As an entry-level power supply, the price/performance ratio is still very good, with over-current protection, over-voltage protection, short-circuit protection, overload protection, over-temperature protection, and physical switches. It can be said that some of them have. The most important thing is to support three-year renewals, which can be said to be outstanding in the same price range. This time the end of this installment.
KNM5 Series Moulded Case Circuit Breaker
KNM5 series Moulded Case Circuit Breaker is MCCB , How to select good Molded Case Circuit Breaker suppliers? Korlen electric is your first choice. All moulded Case Circuit Breakers pass the CE.CB.SEMKO.SIRIM etc. Certificates.
Moulded Case Circuit Breaker /MCCB can be used to distribute electric power and protect power equipment against overload and short-current, and can change the circuit and start motor infrequently. The application of Moulded Case Circuit Breaker /MCCB is industrial.
Korlen electric also provide Miniature Circuit Breaker /MCB. Residual Current Circuit Breaker /RCCB. RCBO. Led light and so on .
KNM5 series Molded Case Circuit Breaker,Small Size Molded Case Circuit Breaker,Electrical Molded Case Circuit Breaker,Automatic Molded Case Circuit Breaker
Wenzhou Korlen Electric Appliances Co., Ltd. , https://www.zjaccontactor.com