How to install solar energy on a lawn mower
Main material:
Solar lawn mower
Tools needed:
Solar lawn mower
Production steps:
step 1:
Lawn mowers are not very commonly used here, but sweeping robots can indeed be modified.
This tutorial is to teach you how to use solar panels to power your own lawn mower.
Step 2:
Materials and tools needed:
Battery lawn mower
Solar panels with an output voltage of 12V
Wire (red wire and black wire)
multimeter
Toolbox
Step 3:
Stripping:
First cut off the cigarette lighter plug and strip the wires inside. A total of two sections of red wire and two sections of black wire, with the same length, are required to remove the insulation layer at both ends. If it is a standard wire, be slow when stripping the insulating layer, otherwise the stripped wire ends will be messy.
Step 4:
Step 5:
Step 6:
wiring:
After determining the polarity of the battery, connect the wires to the corresponding electrodes. Since the two 12V batteries are connected in series, they can only be connected to a parallel circuit for charging, and then all parts are connected to the lawn mower.
Step 7:
Step 8:
Connect solar panels
Step 9:
After clearing the above step, connect the red wire to one pole, and then connect the black wire to the other pole. Be careful not to connect the jumper, or the battery will short-circuit. Finally, connect the solar panel to the lead.
Step 10:
Charging~~
After the above four steps are completed, put the lawn mower under the sun to charge it. Although the charging effect is best when it is in direct sunlight, the battery panel can also work in cloudy weather. Under normal circumstances, charging takes 4 to 6 hours, depending on the weather conditions and the angle of the battery panel to the sun. The lawn mower can work continuously for 20 to 30 minutes. Since the cut grass will increase the resistance, if the cut grass is collected in a bag, the lawn mower will work longer. The battery panel of the lawn mower does not work during the working process (only responsible for charging). Due to the need to make room for the battery board, the battery must be hung behind the trademark. But since then there is no need to recharge, it is worth the time to spend.
Tobacco control has been a common global concern, while the traditional tobacco industry gradually, new tobacco has become the new strategic layout of tobacco giants. In this context, the emergence of e-cigarettes has further led to the replacement of traditional tobacco. At present, there are already a thousand different types of e-cigarettes, which have undergone several stages of development. The e-cigarette we are introducing today is the CBD pod systewm, a new type of e-cigarette. In this article we will combine the characteristics of the CBD with a brief analysis of it.
·Anti-anxiety
According to scientific studies,CBD can help depressed patients reduce their anxiety. The use of CBD can help maintain endogenous cannabinoids at a reasonable level, making the patient feel good and happy physically, and without any dependence.
·Anti-ageing
CBD is very powerful in anti-ageing. As a non-psychoactive component of the cannabis plant CBD inhibits the glutamate toxic response of cortical neurons and suppresses excessive oxidative stress, helping the body to achieve anti-ageing effects.
·Anti-inflammatory
CBD reduces the free radicals that cause neurodegenerative diseases and reduces swelling through its anti-inflammatory effects. In addition, CBD stimulates appetite and relieves pain.
China Disposble Vape Pen,E-Cigarette Cbd Vaporizer,Best Disposable Cbd Vape Pen,Disposable Cbd Vape
Shenzhen MASON VAP Technology Co., Ltd. , https://www.cbdvapefactory.com