Â
Products:Â TFW are synchronous excitation alternator
Feature and usage
Â
T series of synchronous motors can be made into TF TK TDMK TZ TL series.
TF:TF TFW are synchronous excitation alternator,
TK;This series synchronous motor mainly design for compressors.
TDMK;This series motor specialize design for large size ball mill.
TZ:specialize for mill machine. and TL are vertical mounting synchronous motor.
These series of motors have high operating efficiency, good material, perfect manufacture, stable performance and revolution does not change with load variation.
As for technical requirement of this series of motors, in addition to the specification of special technical specification of the product, other requirements comply with China National Standard GB755
The mechanical dimension and tolerance for each part of this series of motors comply with China National standard GB1889-1804 and ISO standard.
The protection grade for case of this series of motors is IP00,IP20,IP21,IP23 and IP44 in accordance with GB/T4942.1 and IEC 34-5
The way of cooling for this series of motors is IC01 IC401,IC27,IC37,IC81W and IC91 in accordance with standard of GB/T1993 and IEC60034-6
The basic installation mode for this series of motors complies with the specification of GB997 and IEC60034-7
Model Explanation
Motor Performance
Power range:250KW--3000KW
Rated Voltage: 380V 400V 440V 690V 3KV 6KV 10KV
No.of pole;6-40
Protection Class: IP00,IP20,IP21,IP23 and IP44
Ambient Temperature: -15°C~40°C
Altitude: not exceed 1000 Meter
Rated Frequency: 50Hz/60Hz
Insulation Class: F
Temprature rise: B
Working Duty: S1(Continuous)
Structure Description
Frame: Integral construction welded by steel plate. The frame and plain bearing housing are fixed on the base plate welded by steel plate respectively.Â
Stator coil: Laminated by 0.5mm silicon steel fan-shaped lamination. The two sides of fan-shaped lamination is painted with insulating varnish. The stator iron core is fixed on the frame by tighting screw or dovetail rib.Â
Stator coil: The coil is two layer lap winding. It has B class insulation and can prevent the corona. The end of the coil is wrapped tightly and be integral varnished.Â
Magnetic pole: Laminated by thin steel plate lamination. The iron core is covered with coil. The whole magnetic pole is fitted on the magnetic yoke.Â
Magnetic coil: Wound by flat copper wire and has B class insulation after be insulating treated.Â
Bearing: Composed of cast iron plain bearing housing and plain bearing half-liner casted with alloy. The lubricating method is oilring self-lubricating or compound lubricating with outer oil system.Â
Brush and collector ring: The collector ring's construction is assembling. The brush is fixed in the constant voltage brush box and connected by the conducting plate. The whole brush support if fixed on the side of bearing.Â
Exciting mode: T series synchronous electrical machinery are excited by thyristor exciting unit. The exciting unit can be provided by the manufactory.
Packing & Shipping
Our Servies
Â
WHY CHOOSE USÂ
Â
WHAT WE DO AT PINNXUN
- Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
Â
Products:Â TFW are synchronous excitation alternator
Feature and usage
Â
T series of synchronous motors can be made into TF TK TDMK TZ TL series.
TF:TF TFW are synchronous excitation alternator,
TK;This series synchronous motor mainly design for compressors.
TDMK;This series motor specialize design for large size ball mill.
TZ:specialize for mill machine. and TL are vertical mounting synchronous motor.
These series of motors have high operating efficiency, good material, perfect manufacture, stable performance and revolution does not change with load variation.
As for technical requirement of this series of motors, in addition to the specification of special technical specification of the product, other requirements comply with China National Standard GB755
The mechanical dimension and tolerance for each part of this series of motors comply with China National standard GB1889-1804 and ISO standard.
The protection grade for case of this series of motors is IP00,IP20,IP21,IP23 and IP44 in accordance with GB/T4942.1 and IEC 34-5
The way of cooling for this series of motors is IC01 IC401,IC27,IC37,IC81W and IC91 in accordance with standard of GB/T1993 and IEC60034-6
The basic installation mode for this series of motors complies with the specification of GB997 and IEC60034-7
Model Explanation
Motor Performance
Power range:250KW--3000KW
Rated Voltage: 380V 400V 440V 690V 3KV 6KV 10KV
No.of pole;6-40
Protection Class: IP00,IP20,IP21,IP23 and IP44
Ambient Temperature: -15°C~40°C
Altitude: not exceed 1000 Meter
Rated Frequency: 50Hz/60Hz
Insulation Class: F
Temprature rise: B
Working Duty: S1(Continuous)
Structure Description
Frame: Integral construction welded by steel plate. The frame and plain bearing housing are fixed on the base plate welded by steel plate respectively.Â
Stator coil: Laminated by 0.5mm silicon steel fan-shaped lamination. The two sides of fan-shaped lamination is painted with insulating varnish. The stator iron core is fixed on the frame by tighting screw or dovetail rib.Â
Stator coil: The coil is two layer lap winding. It has B class insulation and can prevent the corona. The end of the coil is wrapped tightly and be integral varnished.Â
Magnetic pole: Laminated by thin steel plate lamination. The iron core is covered with coil. The whole magnetic pole is fitted on the magnetic yoke.Â
Magnetic coil: Wound by flat copper wire and has B class insulation after be insulating treated.Â
Bearing: Composed of cast iron plain bearing housing and plain bearing half-liner casted with alloy. The lubricating method is oilring self-lubricating or compound lubricating with outer oil system.Â
Brush and collector ring: The collector ring's construction is assembling. The brush is fixed in the constant voltage brush box and connected by the conducting plate. The whole brush support if fixed on the side of bearing.Â
Exciting mode: T series synchronous electrical machinery are excited by thyristor exciting unit. The exciting unit can be provided by the manufactory.
Packing & Shipping
Our Servies
Â
WHY CHOOSE USÂ
Â
WHAT WE DO AT PINNXUN
- Stamping of lamination
Rotor die-casting
Winding and inserting - both manual and semi-automatically
Vacuum varnishing
Machining shaft, housing, end shields, etc
Rotor balancing
Painting - both wet paint and powder coating
Motor assembly
Packing
Inspecting spare parts every processing
100% test after each process and final test before packing.
High Voltage SWA Armored Cable
High Voltage SWA Armored Cable is a type of Power Cable that is designed to transmit high voltage electricity from one location to another. It is constructed with a steel wire armor layer that provides mechanical protection and prevents damage to the cable during installation and operation. The cable also has a layer of insulation that is designed to withstand high voltage electrical currents and prevent electrical leakage.
The SWA armored cable is commonly used in industrial and commercial applications where high voltage electricity is required, such as power generation plants, electrical substations, and large manufacturing facilities. It is also used in underground and overhead transmission lines, as well as in building wiring systems. The high voltage SWA armored cable is available in different sizes and specifications to meet the specific needs of different applications.
High Voltage SWA Armored Cable,SWA Armored Copper Cable,Copper Conductor Cable,Steel Wire Armored Electric Cable
Ruitian Cable CO.,LTD. , https://www.rtlinecable.com