Engine cleaning agent action details_How to use

Foreword

We all know that in the process of working, the fuel can't be burned 100%. It inevitably contains some impurities. In addition, carbon deposits will also occur in this process. The accumulation of carbon will damage the engine. It is. Then, using some effective engine cleaners, some carbon can be removed and discharged, extending the life of the engine.

In addition, engine cleaners have the following features

1. Quickly eliminate low temperature gel, sludge and high temperature carbon deposit in the internal lubrication system of the engine to ensure good lubrication.

Engine cleaning agent action details_How to use

2, excellent clean dispersing agent, the oil in the system is suspended in the oil, it is easy to drain when changing oil.

3, flat vibration reduction, reduce exhaust pollution.

4. In the cleaning process, an extreme pressure protective film is formed on the engine friction sub-surface to provide super anti-wear protection for the engine within a certain period of time.

Engine cleaning agent action details_How to use

Precautions

In the usual use of cars, carbon deposits are gradually increasing, which in turn leads to poor engine performance, idling, poor acceleration, increased fuel consumption, and excessive exhaust gas. This is because the carbon deposits in the intake port, the valve, and the combustion chamber will cause fuel to be absorbed in the cool car, and the fuel will be released during the hot car, which causes the cold car to be difficult to catch the car, and the fuel consumption of the hot car is high. Therefore, the engine fuel supply system must be cleaned in time. And the combustion chamber. In short, engine fuel cleaners are still useful.

Introduction to engine internal cleaning agent

The engine internal cleaning agent or cleaning liquid is a kind of automobile maintenance for cleaning harmful impurities such as sludge, carbon deposit and colloid in the engine, keeping the internal combustion of the engine, enhancing the fluidity of the oil, reducing wear and prolonging the service life of the engine. Supplies

Main ingredients and product performance

The main component of the engine internal cleaning agent is mainly composed of surfactant, alkali, chelating agent, detergent, metal corrosion preparation, water and so on.

Product performance 1. It can effectively clean carbon, gelatin and other harmful substances inside the engine.

2. It can prevent the combination and remove the oil film and sludge formed by the old oil, so as not to reduce the performance of the new oil.

3. It can improve the efficiency of the engine, thereby reducing noise and reducing fuel and oil loss.

4. It can neutralize the long-term harmful acidic substances generated inside the engine.

5. Can clean the crankcase PVC valve. Ability to clean hydraulic tappets and valve lifters.

6. It can clean the lubrication system of the engine, reduce the engine temperature, enhance the fluidity of the oil and improve the lubrication efficiency. Can avoid engine burning oil. 7. The cleaning agent inside the engine is very simple to use, and the inside of the engine can be maintained, cleaned, and cleaned internally without disassembling the engine.

Engine cleaning agent action details_How to use

Engine cleaner usage

The use of the engine cleaner is very simple, and the inside of the engine can be cleaned and cured without disassembling the engine. Engine cleaning is generally carried out when changing the oil. The method of use is as follows: Pour one bottle of this product into the oil tank, and after idling for 5-10 minutes (if the engine has not been cleaned for a long time, the cleaning time can be extended), add the cleaning agent to the engine. The old oil is drained, the oil filter is replaced, and the new oil can be added. One bottle for the four-cylinder car and two bottles for the six-cylinder car. Under normal circumstances, it is necessary to wash once for 1.5-2 million kilometers. For engines that use semi-synthetic engine oil and mineral oil for a long time, the cleaning cycle should be shortened appropriately. If you use fully synthetic motor oil for a long time, you can extend it. After cleaning to 2 to 25,000 km, the fully synthetic motor oil itself has a strong cleaning ability, so the number of kilometers can be extended. Maintenance area: lubrication system

Maintenance time: start maintenance after the new car travels 20,000 kilometers; maintenance interval: use once every 10,000 kilometers;

Maintenance vehicles: all kinds of gasoline engine can be used; the necessity of maintenance: give full play to the lubricating performance of lubricating oil, reduce the secondary pollution of new lubricating oil, and prolong the service life of the engine.

Precautions:

1. Do not take it orally, accidentally take it, please seek medical attention immediately;

2. This product is inadvertently in contact with eyes or skin. Please rinse immediately with clean water; then seek medical attention.

3, please leave the high temperature, fire source, please store in a cool and dark place.

Cleaning and maintenance

Regular cleaning of the inside of the engine is one of the indispensable items for routine maintenance of the car. When the engine is working in a high temperature environment, the oil will produce carbon deposits and colloids at high temperatures. Due to the relatively poor quality of China's oil products, there are many sulfur and phosphorus. When these substances enter the engine, they will generate acidic substances to corrode the engine. Therefore, the engine accumulates a large amount of carbon deposits, colloids, sludge and some harmful substances, which affects the fluidity of the oil, reduces the protection of the engine oil, aggravates the wear of the engine, increases the probability of engine overhaul, and shortens the service life of the engine.

The most common problem is that the engine burns oil after driving 80-100,000 kilometers. The main cause of this problem is excessive carbon deposit inside the engine, causing the piston ring to be stuck, and the rubber parts such as acid seals, which cause the engine to be tightly sealed, the oil is missing, and there is a serious cold start or sudden acceleration. Blue smoke, only the engine can be dismantled for maintenance.

As we can see above, keeping the engine interior clean is one of the important contents of car maintenance.

Label Printer

SUNLUX IOT Technology (Guangdong) INC. , https://www.sunluxbarcodereader.com