Honeywell Multifunction Controller MVC-80H-CPSW1A Shanghai Chuangyi Supply
The Honeywell Multi-Controller Multi Valent Controller (MVC) provides a cost-effective solution for multiple applications and can replace the XCL8010A DDC controller.
Online Contact--Zhanggong--QQ
The MVC control system has the following functional improvements. The user interface of the Excel Touch touch screen requires only 2 cables to connect with the ZIO wall mount module, Evotouch and CM700/900 wireless wall mount module (68MHz); it can be controlled via C-Bus and other different controls. Communication. Universal installation concept (patent panel door installation and mechanical design), removable terminals, and wiring test functions reduce installation and commissioning time and effort. MVC is freely programmable and supports multiple applications. With Honeywell's application library, MVC can be applied to special occasions and customer needs.
The application library provides energy management functions for a variety of applications. This feature includes the ability to optimize start-stop, night-time decontamination, heating, cooling, and ventilation for maximum load requirements.
MVC Multifunction Controller Features and Benefits:
Multiple I/O terminals: 1 triac output, 8 relay outputs, 4 analog outputs, 4 digital inputs, 2 PT1000 inputs, 8 general-purpose outputs Tri-directional bidirectional switch output supports the pump speed control user interface Includes dot matrix display (160 x 80 dot matrix, 5 rows, 20 bytes per row, knob and six buttons for easy operation (MVC-80M-CPSW1A only)
The communication interface accommodates the following points:
1. OpenTherm TM Interface for Wireless Wall Mount Modules
2. Sylk Bus for 2-wire wall panels
3. C-Bus for peer controller communication
4. Plug and Play Panel Bus for I/O Modules
5. Communication interface for PC and touch panel connection
6. Flexible installation: MVC is suitable for small-size controller cabinets and supports rail mounting, wall mounting and panel mounting
7. Two different removable terminal blocks, namely the latest push-in terminals and screw-type terminals
8. Two LED/customer use buttons/proprietary features and four display status LEDs
9. Guaranteed configurable safe position of the output signal (assuming communication failure between I/O module and MVC) configurable sensor safety value (assuming sensor short-circuit/sensor disconnected)
10. Real-time clock, runtime counter
11. Trend data buffer, historical data alarm buffer, message alarm; 18 bytes of use address
12. Gold cap RAM memory provides 72 hours of protection; Backup Flash EPROM
Features of MVC-80H-CPSW1A and MVC-80M-CPSW1A 1. Various I/O terminals: 1 three-terminal bidirectional switch output, 8 output relays, 4 analog outputs, 4 digital inputs, 2 PT1000 inputs, 8 universal outputs 2. Triac output supports pump speed control 3. User interface includes dot matrix display (160 x 80 dot matrix, 5 rows, 20 bytes per row, knob and six buttons, making operation easy (Limited to MVC-80M-CPSW1A only)
Communication Interface OpenThermTM Interface for Wireless Wall Mount Modules Sylk Bus for 2-Wire Wall Panel Mount
C-Bus for peer controller communication
Plug and Play Panel Bus for I/O Modules
Suitable for communication interface between PC and touch panel. 4. Flexible installation: MVC holding rail mounting, wall mounting and plywood small security device controller box, at the same time support 5. two sons and no screws Modifiable extraction of terminal block terminals, ie the latest push-in terminals 6. Two LED/customer-use buttons/proprietary functions and four display status LEDs
7. Guaranteed configurable and safe position of the output signal (assuming communication failure between the I/O module and MVC)
8. Configurable sensor safety value (assuming sensor short/on) Sensor off 9. Real time clock, running counter 10. Trend data buffer, historical data alarm buffer, message alarm; 18 bytes using address 11. Gold Cap RAM memory provides 72 hours of protection; Backup Flash EPROM
MVC controller model and related differences description:
MVC-80H-CPSW1A MVC (without HMI): B-port (RJ45), C-Bus Communication Interface, Panel Bus Communication Interface, Sylk (2-wire Wall Panel), OpenThermTM2 Wiring (Radio Bridge)
MVC-80M-CPSW1A MVC with HMI: B-port (RJ45), C-Bus Communication Interface, Panel Bus Communication Interface, Sylk (2-wire Wall Panel), OpenThermTM2 Wiring (Radio Bridge)
The MVC controller can communicate with multiple devices through different bus methods.
The MVC controller can also communicate with up to 16 Panel Bus modules through the Panel Bus (see Figure 8 and Table 10 for more information).
Electrical performance parameter power supply:
Power supply is completed by connecting terminal 1 and terminal 2. The MVC can be powered from a controller 115Vac (-10%) to 230 Vac (+10%) at a 50/60 Hz power supply and has a maximum power of < 12 VA.
RAM:
256kB
Flash memory (built-in)
32kB RAM
2M flash memory (external)
512kB SRAM (External)
processor:
STM32F101ZC ARM 32-bit CortexTM-M3 CPU, 36MHz
Memory and real-time clock backup
When the power supply fails, the super capacitor will store the contents of the RAM clock. The real-time clock can operate for 72 hours.
MVC controller input and output point specification parameter type parameter value
8 analog inputs (universal)
Resolution: 12-bit
Accuracy: 75 mV
Voltage: 0 (2) ~ 10 V (for high impedance software controlled switches)
Current: 0 (4) ~ 20 mA via 499 ohm resistor external sensor: NTC 20kOhm applied to -50 ~ + 150 ° C or NTC10kOhm-50 ~ + 150 ° C (with reduced accuracy)
Binary input: up to 0.4 Hz
Remarks: sensor drift calibration, sensor failure detection, and support for sensor safety values
Company: Shanghai Chuangyi Industrial Co., Ltd. Address: Room 1218, No. 4, Lane 178, Puhui Road, Shanghai Website: http://
For more products, please visit the website: http:// Shanghai Chuangyi
UL & ENEC Certificate EMI IEC Filter
Yeswitch EMI Filter intergrates IEC Inlet filter, Sigle phase filter, Two phase filter and 3-phase 3-wire filter. The filter with excellent noise supperssion performance compact size, the IEC filter rated current can be offered up to 15 amps, and Our 3-Phase 3-Wire filters 7-100A current. There are various output of Filter selections such as fast-on terminal, solder lug terminal, PCB terminal, and leadwire.
Yeswitch EMI Filter approved by UL, CSA, VDE, CQC and CE. The application of EMI Filter for Electrical and electronic equipment, Single-phase power supplies, UPS, Medical equipment, Test and Measure equipment.
EMI Filter Specification
RATING: 125/250VAC, 480VAC
Currents: UP to 100A
Operating frequency: 50/60Hz
Hipot rating(Line to Line):1450VDC
Hipot rating(Line to groud):1800VDC
Operating termperature: 25℃+85℃
Safety complicance: UL, CSA, VDE, CQC, CE
Our Advantages
From the purchase of raw materials to the finished product, all production process (product development/plating/mold and equipment processing/ metalpressing/ plasticinjection/semi-automatic and fully automated equipment assembly, etc.) are completed in the factory. Our metal pressing and plastic injection own the advantages of 100% self-made mold, from a single form to the various forms of application. And we continuously keep innovation and enhance the technology in order to collaborate with our customers to design the most sophisticated products. Yeswitch Electronics Co., Ltd., whether in production base or in quality assurance department in the head office, have professional equipment and technical personnel. In addition to the annual new product development, product improvement and testing are performed as annual plan to ensure that listed products maintain in best quality. Therefore, our long-term customers/partners, get the best quality of the switches.
IEC Plug Filter, Sigle phase Filter, Double phase Filter, IEC Inlet filter,3-Phase 3-Wire filter
YESWITCH ELECTRONICS CO., LTD. , https://www.yeswitches.com